Home  >>  News

Is the Caster Broken Fast? Do you Have the Correct Overhaul!

Nov 30, 2018

In order to reduce labor intensity and improve work efficiency, casters such as Heavy Duty Caster Wheel have been used as a necessity for industrial support. However, after a long time of use, the casters are bound to be damaged. In the face of such a situation, how to repair and maintain industrial casters?

Cast Iron Industrial Caster Wheel

Too loose or too tight the wheel such as All Iron Caster is another factor, replacing the broken wheel to avoid unstable rotation. After checking and replacing the wheels, ensure that the axles are tightened with the lock washers and nuts. Because the looseness of the axle will cause the spoke and the bracket to rub and jam, it should be noted that there are always replacement wheels and bearings to avoid the loss of production.

Tighten the loose axle and nut and check for damage to the weld or support plate. When installing the casters, use a lock nut or a lock washer. The expansion of the caster such as Cast Iron Industrial Caster Wheel must be ensured that the plunger is securely mounted in the casing.

Lubrication is normally performed every six months under normal conditions. The car should be lubricated and maintained after each month of cleaning.

  • Zhao Xuhuan
  • Hujiazhuang, Dengzhuang Township, Taocheng Atra, Hengshui, Hebei Province, China.
  • +86 186 3181 8220
  • yutong-zhao@ytcaster.com

Copyrights © Yutong Caster Products Factory All Rights Reserved

Powered by